FBA-A(9)
Product Features
- The thinnest unit in the class, only 245mm (300mm integration height) and therefore narrow suspended ceiling gaps are no longer a challenge
- The average external static pressure of up to 150 Pa facilitates the use of flexible conduits of various lengths
- Through the combination with R-32 Bluevolution technology, environmental impacts are reduced by 68% compared to R-410A, lower power consumption is achieved thanks to high energy efficiency and lower refrigerant load by up to 16%.
- The ability to change ESP by wired remote control allows optimisation of the air flow volume
- Discreetly hidden on the roof: only the grids of the inlet and outlet ducts are visible
- Low operating noise levels up to 25dBA
- Series of single indoor units for R-32 and R-410A
- The multi-zoning kit allows multiple independently controlled climate zones served by one indoor unit
- Reduced energy consumption thanks to the specially designed DC fan motor
- Optional fresh air inlet
- Flexible installation: the air suction direction can be either from the rear or from the bottom and a choice can be made between free use or connection to optional suction grilles
- Standard integrated condensate pump with 625mm lift increases flexibility and speed of installation
This unit can be used with the following units.
- FBA-A(9) / 2MXM-A
- FBA-A(9) / 2MXM-N
- FBA-A(9) / 3MXM-A
- FBA-A(9) / 3MXM-A9
Benefits
-
Onecta application (Optional)
Control the indoor climate from any location via smartphone or tablet
-
“Home leave” function
Maintains the indoor temperature at the level you have selected in your absence, thus saving energy -
Multiple zoning (Optional)
Allows up to 6 separate air conditioning zones with one indoor unit
-
Fan only
The unit can be used as a fan, providing air without heating or cooling. -
Automatic cooling/heating switching
Automatically selects a heating or cooling programme to reach the temperature you have selected. -
Completely silent
Daikin indoor units are completely silent. In addition, the outdoor units guarantee silent operation without disturbing residents. -
Fan speed adjustment settings (3 steps + automatic mode)
Allows the selection of different fan speeds.
-
Dehumidification programme
It allows the reduction of humidity levels without fluctuations in room temperature. -
Air filter
It retains suspended dust particles ensuring a constant supply of clean air. -
Weekly timer (Optional)
It can be set to start cooling or heating operation at any time on a daily or weekly basis.
-
Infrared remote control (Optional)
Starts, stops and controls the air conditioner remotely.
-
Wired remote control (Optional)
Starts, stops and controls the air conditioner.
-
Central control (Optional)
Starts, stops and controls multiple air conditioners from a central point.
-
Automatic restart
After a power failure the unit is automatically reset to the original settings. -
Αυτοδιαγνωστικός έλεγχος
Απλουστεύει τη διαδικασία συντήρησης με την ένδειξη σφαλμάτων ή δυσλειτουργιών του συστήματος.
-
Condensate Pump Kit (Standard)
Facilitates the drainage of condensate from the indoor unit.
-
Possibility to connect two/three/four units
2, 3 or 4 indoor units can be connected to a single outdoor unit even if they have different performance. All indoor units operate in the same cooling or heating program from the same remote control. -
Ability to connect several units
Up to 5 soldering units can be connected to one outdoor unit even if they have different performance. All indoor units can operate independently in the same operating program, cooling or heating. -
VRV for home application
Up to 9 indoor units can be connected to one outdoor unit (even if they are of different performance and up to class 71). All indoor units can operate independently in the same operating programme. -
Infrastructure cooling
Removing continuously generated heat from IT equipment and servers in a reliable, efficient and flexible manner to ensure maximum uptime while maintaining a high return on investment rate.
Reviews
There are no reviews yet.