Round Flow – FCAG-B
Product Features
- Through the combination with R-32 Bluevolution technology, environmental impacts are reduced by 68% compared to R-410A, lower power consumption is achieved thanks to high energy efficiency and lower refrigerant load by up to 16%.
- With the optional automatic filter cleaning mask, higher efficiency & comfort and lower maintenance costs are achieved.
- Two optional smart sensors improve energy efficiency and comfort.
- The lowest installation height on the market: 214mm for classes 20-63
- The largest selection of decorative masks ever: branded masks in white (RAL9010) and black (RAL9005) and standard masks in white (RAL9010) with grey grilles or completely white
- The single indoor unit is combined with R-32 and R-410A outdoor units, simplifying inventory management
- Independent blade control: flexibility to fit any room layout without changing the location of the unit!
- Larger blades and unique rotation pattern improve even air distribution
- 5 different fan speeds available for maximum comfort
- Optional fresh air inlet
- The branching outlet allows optimisation of air distribution in irregularly shaped spaces or for supplying air to small adjacent rooms
- Standard condensate pump with 675mm lift increases flexibility and speed of installation
This unit can be used with the following units.
- FCAG-B / 2MXM-A
- FCAG-B / 2MXM-N
- FCAG-B / 3MXM-A
- FCAG-B / 3MXM-A9
Benefits
-
Presence and floor sensor
The presence sensor directs air away from any person detected in the room when airflow control is active. The floor sensor detects the average floor temperature and ensures equal temperature distribution between the ceiling and the floor. -
“Home leave” function
Maintains the indoor temperature at the level you have selected in your absence, thus saving energy -
Self-cleaning filter (Optional)
The filter is automatically cleaned once a day. The simplicity of maintenance means optimum energy efficiency and maximum comfort without the need for expensive or lengthy maintenance.
-
Preventing the creation of air currents
When the unit starts to heat up or when the thermostat is off, the air outlet direction is set to horizontal and the fan to low speed, preventing currents from building up. After preheating, the airflow direction and fan speed can be adjusted as desired. -
Independent blade control
Independent blade control via the wired remote control makes it easy for you to easily set the position of each blade individually to suit any new room configuration. Optional closure kits are also available. -
Onecta application (Optional)
Control the indoor climate from any location via smartphone or tablet
-
Fan only
The unit can be used as a fan, providing air without heating or cooling. -
Automatic cooling/heating switching
Automatically selects a heating or cooling programme to reach the temperature you have selected. -
Completely silent
Daikin indoor units are completely silent. In addition, the outdoor units guarantee silent operation without disturbing residents. -
Prevent unsightly stains on the ceiling
Αποτρέπει την έξοδο αέρα σε οριζόντια κατεύθυνση για μεγάλη απόσταση, για την αποφυγή λερώματος της οροφής. -
Automatic vertical movement of blades
Possibility to select automatic vertical movement of the air outlet blades for uniform air and temperature distribution throughout the room. -
Fan speed adjustment settings (5 steps + automatic mode)
Allows selection of different fan speeds.
-
Dehumidification programme
Allows to reduce humidity levels without fluctuations in room temperature.
-
Flash Streamer (Προαιρετικό)
Purifies the air of pollutants such as viruses, bacteria, fine dust (PM1.0), oudeurs, allergens, etc ensuring a healthy and hygienic indoor environment
-
Air filter
Retains suspended dust particles ensuring a constant supply of clean air.
-
Weekly timer (Optional)
Can be set to start cooling or heating operation at any time on a daily or weekly basis.
-
Weekly timer (Optional)
Can be set to start cooling or heating operation at any time on a daily or weekly basis.
-
Wired remote control (Optional)
Starts, stops and controls the air conditioner.
-
Central control (Optional)
Starts, stops and controls multiple air conditioners from a central point.
-
Automatic restart
After a power failure, the unit is automatically restarted to the original settings.
-
Self-diagnostic check
Simplifies the maintenance process by indicating system errors or malfunctions.
-
Condensate Pump Kit (Standard)
Facilitates the drainage of condensate from the indoor unit.
-
Possibility to connect two/three/four units
2, 3 or 4 indoor units can be connected to a single outdoor unit even if they have different performance. All indoor units operate in the same cooling or heating program from the same remote control.
-
Ability to connect several units
Up to 5 soldering units can be connected to one outdoor unit even if they have different performance. All indoor units can operate independently in the same operating program, cooling or heating.
-
VRV for home application
Up to 9 indoor units can be connected to one outdoor unit (even if they are of different efficiency and up to class 71). All indoor units can operate independently in the same operating programme.
-
Infrastructure cooling
Removing continuously generated heat from IT equipment and servers in a reliable, efficient and flexible manner to ensure maximum uptime while maintaining a high return on investment rate.
Reviews
There are no reviews yet.